- Home
- Services
- Exterior painting
- Clarington
Exterior painting in Clarington
Delivery is straightforward in the subdivisions and planned in advance for rural side roads and long driveways, with a site contact confirmed the day before. The crew washes and dries the house, scrapes and primes failing areas, masks windows and plants, paints the body then the trim and walks the property with you at the end. Exterior painting is mostly prep: wash, scrape, sand, prime and caulk, then two coats of a paint built for Ontario weather.
Concept imageryClarington, on the ground.
Clarington covers Bowmanville, Courtice, Newcastle and Orono, so century plaster houses with painted siding, recent subdivisions in builder flat and farmhouses all sit in one municipality. Older houses bring wood siding, cedar trim and layered paint that needs scraping and priming, and newer ones bring stucco, fibre cement and vinyl that need the right primer and a vinyl-safe colour. Pre-sale repaints, century trim and siding, first repaints over builder paint, mudrooms and back halls, and cabinet refinishing make up most of the Clarington work.
Houses outside the subdivisions in Clarington are entered from the back or side door, so that hall is painted in a finish that can take boots and be wiped.
Read more about painters in Clarington or the full exterior painting page.
On the quote, from the start.
- 01A full walk around the house in daylight, with loose paint, soft wood and failed caulking marked before the quote
- 02Pressure wash or hand wash to remove chalk, mildew and dirt, then a drying period before any paint
- 03Scraping and sanding of failing paint, feathered edges, and spot or full priming where bare material shows
- 04New caulking at trim joints, window frames and siding ends so water stays out
- 05Two coats of exterior acrylic on siding and trim, brushed and rolled or sprayed and back-brushed depending on the surface
- 06Plants tied back, windows and hardscape masked, daily clean-up and a walk around with you at the end
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Surface and its condition | Sound siding needing a wash and two coats is the baseline. Peeling paint, bare wood and failed caulking add scraping, priming and repair hours. |
| Height and access | A bungalow is reached from ladders. A two or three-storey house with steep grades may need staging or a lift. |
| Material | Smooth siding rolls quickly. Rough stucco, brick and cedar drink more paint and take more time per square metre. |
| Trim, doors and detail | Window grilles, shutters, railings and decorative trim are brushed by hand and add time out of proportion to their area. |
The season and the weather set the schedule as much as the scope does. We quote from a walk around the house, not from a photo, and the quote separates the body of the house from the trim.
Exterior painting questions from Clarington
How early in the year can you start exteriors in Clarington?
Once overnight temperatures in Clarington stay above the paint's limit and the surfaces are dry. That is usually [May] for standard paint and a few weeks earlier with the low-temperature lines. We book spring exteriors over the winter.
Do I need a permit to paint my house in Clarington?
No permit is needed for painting an existing house in Clarington. Heritage-designated properties can have colour rules, so if your home is listed we ask before quoting a colour change.
Our mudroom and back hall get destroyed by boots and the dog every winter. What finish holds up?
A scrubbable satin or semi-gloss on the walls to about chair-rail height, or the whole wall, and a hard enamel on the trim, doors and any built-in bench. Both can be washed with a cloth and mild cleaner without burnishing. Dents and gouges are filled before painting so the surface is flat enough to wipe. A durable finish there means a repaint every several years instead of every spring.
Our Bowmanville house is a century home with original trim. Do you treat it differently?
Yes. Century trim has a hundred years of paint in its profiles, and often a few layers that are older than the late 1970s and may contain lead. The crew sands it back with wet or vacuum sanding, fills the chips, primes and sprays or brushes a leveling enamel so the profile reads sharp again. [John confirms testing and containment practice.] Where the trim is stained wood under the paint, we tell you so you can decide.