Cabinet painting and spraying in Oakville
House work sets up a sealed spray area that moves through the home, while condo work needs a booked elevator and the building's own working hours. The kitchen is sealed in plastic, doors are removed and sprayed in a dust-controlled setup, boxes are finished in place and everything is rehung and adjusted before the walk-through. Cabinet painting takes every door off, preps it properly and sprays it with a hard waterborne enamel so the kitchen you own looks new.
Concept imageryOakville, on the ground.
Oakville runs from large houses south of Lakeshore with heavy millwork and stone and wood exteriors, to older renovated pockets in Bronte, newer open-plan subdivisions north of the highway in builder flat, and downtown condos. Oak kitchens from the 1980s and 1990s take paint well once the grain is dealt with, and newer MDF and laminate fronts need the right bonding primer rather than more sanding. Whole-house repaints with a sheen schedule, sprayed millwork and built-ins, exterior trim, soffits and fascia, cabinet refinishing and condo repaints are the Oakville norm.
Large houses in Oakville are painted in a planned order, trim first and walls cut to it, so the finishes read as one decision across every room.
Read more about painters in Oakville or the full cabinet painting and spraying page.
On the quote, from the start.
- 01Every door, drawer front and hinge removed, labelled and tracked so each one goes back where it came from
- 02Degreasing with a dedicated cleaner, then sanding to a dull surface so the primer has something to grip
- 03A bonding primer suited to the cabinet material, whether wood, MDF, laminate or a previous factory finish
- 04Two sprayed coats of waterborne enamel on doors and fronts, with the boxes masked and finished to match
- 05Kitchen sealed off with plastic, counters and appliances masked, and the floor covered end to end
- 06Doors rehung, hinges adjusted, new pulls fitted if you supply them, and a touch-up visit under the [2-year] warranty
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Number of doors and drawer fronts | Each piece is cleaned, sanded, primed and sprayed on both sides. Thirty fronts is a different job from sixty. |
| Door style | Raised-panel and glazed doors have more edges and profiles to sand and more places for a run to hide than a flat slab. |
| Current finish | Bare or previously painted wood primes easily. Thermofoil, high-gloss laminate and old lacquer need a specific primer and more sanding. |
| Colour and sheen | A dark colour over light cabinets, or a pure white over oak grain, can need an extra coat to cover evenly. |
Island and pantry fronts count the same as any other door. The written quote lists the door count so you can see exactly what the job covers.
Cabinet painting and spraying questions from Oakville
Can you spray cabinets in a Oakville condo?
Yes. The doors are sprayed in a sealed setup with the kitchen tented in plastic, and the boxes are brushed or sprayed depending on the room. We book the elevator and keep to the building's work hours in Oakville.
How many days is my Oakville kitchen out of use?
Usually [n] days from the doors coming off to the last hinge adjustment. You can still use the sink and stove most evenings. The written quote gives the exact schedule for your Oakville kitchen.
How do you keep a whole-house repaint in a large Oakville home from taking over our lives?
By phasing it. We agree an order of rooms at the walkthrough, set up a sealed spray area that moves with the work, and finish one floor or wing before starting the next so you always have rooms to live in. Daily clean-up and furniture put back each evening in the rooms we are not in. [John confirms the number of days once the scope is final.] The same crew stays on the job from start to finish.
We want the trim and built-ins sprayed, but we are living in the house. How is the dust and overspray controlled?
Each room is sealed with plastic at the doorways, floors and walls are masked, and the spraying is done with the room closed and a fan venting outside. Doors are taken off and sprayed flat in the garage or a sealed area where possible. Overspray does not leave the sealed room, and the crew cleans the room before the plastic comes down. Walls are painted after the trim, so any dust on them is sanded away before colour.